How to Wash Your Dyson Filter: A Comprehensive Guide

If you own a Dyson vacuum cleaner, you know how important it is to keep the filter clean. A dirty filter can reduce suction power and make the vacuum less effective. Washing your Dyson filter is an easy and cost-effective way to keep your vacuum in good condition. Here’s a step-by-step guide on how to do it.

Step 1: Turn off and unplug your Dyson vacuum

Before you start cleaning your Dyson filter, make sure the vacuum is turned off and unplugged. This will prevent any accidents from happening and keep you safe.

Step 2: Remove the filter

Locate the filter on your Dyson vacuum. Depending on the model, the filter may be located on the top, side, or bottom of the vacuum. Once you find the filter, remove it by pressing the release button or pulling it out gently.

Step 3: Tap the filter to remove loose dirt and debris

Take the filter outside or to a trash can and tap it gently to remove any loose dirt and debris. You can also use a soft brush to remove any stubborn dirt that may be stuck to the filter.

Step 4: Rinse the filter under running water

Hold the filter under running water and rinse it thoroughly on both sides. Make sure to rinse off all the dirt and debris that may be stuck to the filter. You can use warm water to help loosen any stubborn dirt.

Step 5: Wash the filter with soap (optional)

If your filter is particularly dirty, you can wash it with soap. Use a small amount of mild detergent and lather the filter gently with your hands. Rinse the filter thoroughly under running water to remove all the soap.

Step 6: Squeeze out the excess water

Once you’ve rinsed the filter thoroughly, squeeze out the excess water. Be gentle and don’t wring the filter too hard, as this can damage it. You can also use a clean towel to absorb any excess water.

Step 7: Let the filter dry completely

After you’ve squeezed out the excess water, let the filter dry completely. This can take anywhere from a few hours to a full day, depending on the humidity and temperature in your home. Make sure the filter is completely dry before you put it back in the vacuum.

Step 8: Put the filter back in the vacuum

Once the filter is completely dry, put it back in the vacuum. Make sure it’s securely in place and the release button snaps back into position. You’re now ready to use your Dyson vacuum again!

Frequently Asked Questions

How often should I wash my Dyson filter?

You should wash your Dyson filter at least once every three months, or more often if you use your vacuum frequently or have pets.

Can I wash my Dyson filter in the dishwasher?

No, you should not wash your Dyson filter in the dishwasher. The high heat and detergent can damage the filter and reduce its effectiveness.

Can I use a hair dryer to dry my Dyson filter?

No, you should not use a hair dryer to dry your Dyson filter. The high heat can damage the filter and reduce its effectiveness. Instead, let the filter air dry completely.

What should I do if my Dyson filter is damaged?

If your Dyson filter is damaged, you should replace it with a new one. Using a damaged filter can reduce the effectiveness of your vacuum and also damage the motor.

Related VideoHow to Wash Your Dyson Filter: A Comprehensive Guide