Simpson pressure washers are excellent cleaning tools that can help you keep your outdoor surfaces clean and sparkling. However, before you can start using one, you need to know how to start it up properly. In this article, we’ll show you how to start a Simpson pressure washer step-by-step, so you can get your cleaning done quickly and easily.
Step 1: Familiarize yourself with the Simpson pressure washer
Before you start your Simpson pressure washer, you need to familiarize yourself with the machine. Make sure you have read the owner’s manual and understand the different parts of the pressure washer. This will help you avoid any confusion when it comes time to start the machine.
Step 2: Check the oil levels
Before starting your Simpson pressure washer, make sure to check the oil levels. This is important because if the oil levels are too low, it can cause the engine to seize up. Check the oil levels by removing the oil cap and dipstick, wiping it clean, and then reinserting it. Remove it again and check the oil level. If it’s low, add more oil.
Step 3: Connect the hoses
Next, you need to connect the hoses. Attach the high-pressure hose to the pressure washer’s pump and to the spray gun. Make sure to tighten the connections properly to avoid any leaks.
Step 4: Turn on the water supply
Turn on the water supply and make sure that the water is flowing through the hose properly. This will help to prevent any damage to the pressure washer’s pump.
Step 5: Prime the pump
Before you start the engine, you need to prime the pump. To do this, turn on the pressure washer and let the water run through the system for a few minutes. This will help to get rid of any air in the system and ensure that the pump is properly lubricated.
Step 6: Start the engine
Finally, it’s time to start the engine. To do this, turn the fuel valve on and move the choke to the “on” position. Pull the starter cord until the engine starts. Once the engine has started, move the choke to the “off” position and let the engine run for a few minutes before you start using the pressure washer.
Common questions about starting a Simpson pressure washer
What should I do if the engine won’t start?
If the engine won’t start, there are a few things you can try. First, make sure that you have enough fuel in the tank. If the fuel tank is empty, fill it up and try again. If that doesn’t work, check the spark plug to make sure it’s not fouled or damaged. You can also try cleaning or replacing the air filter.
What should I do if the pressure washer won’t build pressure?
If the pressure washer won’t build pressure, there are a few things you can try. First, make sure that the water supply is turned on and that there are no kinks in the hose. You can also try cleaning the nozzle or replacing it if it’s damaged. Make sure to use the correct nozzle for the job you’re doing.
What should I do if the pressure washer is leaking?
If the pressure washer is leaking, there are a few things you can try. First, make sure that all connections are tightened properly. You can also try replacing any damaged or worn-out seals or gaskets. If the problem persists, you may need to take the pressure washer to a professional for repair.