How to Start a Dewalt Pressure Washer

Dewalt is one of the leading manufacturers of power tools, including pressure washers. If you have recently purchased a Dewalt pressure washer and are wondering how to start it, you have come to the right place. In this article, we will guide you through the step-by-step process of starting your Dewalt pressure washer.

Step 1: Read the User Manual

The first and most important step is to read the user manual that came with your Dewalt pressure washer. The manual provides important information about the machine, including the starting procedure, safety precautions, and maintenance tips. Make sure you understand all the instructions before you attempt to start the pressure washer.

Step 2: Prepare the Machine

Before you start the Dewalt pressure washer, you need to prepare the machine. Start by checking the oil level and adding oil if necessary. Then, fill the fuel tank with gasoline. Make sure you use the recommended type of oil and gasoline as specified in the user manual. Next, attach the water supply hose to the machine and turn on the water supply. Finally, connect the high-pressure hose and spray gun to the machine.

Step 3: Turn On the Machine

Once you have prepared the machine, it’s time to turn it on. Start by moving the choke lever to the “closed” position. Then, turn the fuel valve to the “on” position. Next, pull the starter cord firmly and quickly. If the engine doesn’t start on the first try, repeat the process until it does. Once the engine starts, move the choke lever to the “open” position.

Step 4: Adjust the Pressure

After the engine has started, you need to adjust the pressure to suit your needs. The Dewalt pressure washer comes with adjustable pressure settings, and you can adjust the pressure by turning the pressure regulator knob. Turn the knob clockwise to increase the pressure and counterclockwise to decrease it.

Step 5: Start Cleaning

With the pressure adjusted to your liking, you can now start cleaning. Point the spray gun at the surface you want to clean and pull the trigger. Move the spray gun back and forth to cover the entire surface. If you need to switch between different nozzles, turn off the pressure washer first and then switch the nozzle.

FAQs about How to Start Dewalt Pressure Washer

1. What type of oil should I use for my Dewalt pressure washer?

You should use SAE 30 or 10W30 oil for your Dewalt pressure washer. Check the user manual for the recommended oil type and oil capacity.

2. How do I check the oil level in my Dewalt pressure washer?

To check the oil level, remove the oil dipstick from the oil fill tube and wipe it clean. Then, reinsert the dipstick into the tube without screwing it in. Finally, remove the dipstick again and check the oil level. The oil level should be between the “Add” and “Full” marks on the dipstick.

3. How often should I change the oil in my Dewalt pressure washer?

You should change the oil in your Dewalt pressure washer after the first 5 hours of use and then every 50 hours of use thereafter. If you use the pressure washer frequently, you may need to change the oil more often.

4. Can I use any type of gasoline for my Dewalt pressure washer?

No, you should use only unleaded gasoline with a minimum octane rating of 87 for your Dewalt pressure washer. Using gasoline with a lower octane rating may cause engine damage.

5. What safety precautions should I take when using my Dewalt pressure washer?

Always wear protective eyewear and gloves when using the pressure washer. Keep the spray gun pointed away from yourself and others. Never aim the spray gun at electrical outlets, appliances, or people. Finally, turn off the pressure washer and relieve the pressure before performing any maintenance or repairs.