If you have a Whirlpool washer, and it suddenly stops functioning, it could be a problem with the lid switch. The lid switch is an essential component of the washer that detects whether the lid is open or closed. If it malfunctions, the washer may not start or stop working in the middle of a cycle. In this article, we will guide you on how to replace the lid switch on Whirlpool washer.
What You Will Need
Before you start replacing the lid switch, you will need to gather the following tools:
- Screwdriver set
- Replacement lid switch
Steps to Replace Lid Switch on Whirlpool Washer
Follow these simple steps to replace the lid switch on your Whirlpool washer:
Step 1: Unplug the Washer
The first thing you need to do is unplug the washer to avoid any electrical shock or damage. Make sure to unplug it from the wall outlet.
Step 2: Locate the Lid Switch
The lid switch is usually located near the door hinge. Open the lid and look for a small plastic piece that protrudes from the top. This is the lid switch.
Step 3: Remove the Control Panel
Next, you will need to remove the control panel to access the lid switch. Use a screwdriver to remove the screws that hold the control panel in place. Once the screws are removed, gently pull the control panel away from the washer.
Step 4: Disconnect the Lid Switch
Locate the wire harness that connects the lid switch to the washer. You should be able to see it near the top of the washer. Disconnect the wire harness by gently pulling it apart.
Step 5: Remove the Old Lid Switch
Now you can remove the old lid switch. There are usually two screws that hold the lid switch in place. Use a screwdriver to remove these screws and gently lift the lid switch away from the washer.
Step 6: Install the New Lid Switch
Take the new lid switch and position it in the same place as the old one. Use the screws you removed in step 5 to secure the new lid switch in place.
Step 7: Reconnect the Wire Harness
Reconnect the wire harness to the new lid switch. Make sure the connection is secure by gently pushing the two halves of the harness together.
Step 8: Reattach the Control Panel
Now you can reattach the control panel. Align the panel with the washer and use the screws you removed in step 3 to secure it in place.
Step 9: Test the Washer
Once the control panel is reattached, plug the washer back in and test it to make sure the new lid switch is functioning properly. Close the lid and start a cycle to see if the washer is working as expected.
Related Questions
1. How do I know if my Whirlpool washer’s lid switch is bad?
If your Whirlpool washer won’t start, or stops working in the middle of a cycle, it could be a sign that the lid switch is bad. You may also notice that the washer won’t spin or drain properly.
2. Can I replace the lid switch myself?
Yes, you can replace the lid switch on your Whirlpool washer yourself. It’s a simple process that requires only a few tools and can be done in less than an hour.
3. Where can I find a replacement lid switch for my Whirlpool washer?
You can purchase a replacement lid switch for your Whirlpool washer from any hardware store or online retailer that sells appliance parts. Make sure to get the correct model for your washer.