If you own a Speed Queen washer, you may encounter situations where you need to force the drain to remove water from the washer. This can happen if the washer is not draining properly, or if there is a clog in the drain hose or pump. In this article, we will guide you through the process of how to force drain Speed Queen washer.
Step 1: Turn off the Washer
Before you start working on the washer, make sure to turn off the power and unplug it from the electrical outlet. This will prevent any electrical shock or injury while working on the washer.
Step 2: Locate the Drain Hose
The drain hose is usually located at the back of the washer. It should be connected to the drain pump. Check if there is any kink or clog in the hose that might be causing the washer to not drain properly.
Step 3: Remove the Drain Hose
If there is no visible kink or clog in the drain hose, it might be necessary to remove it from the drain pump. You can do this by loosening the clamp that holds the hose in place and pulling it out carefully.
Step 4: Force the Drain
Once you have removed the drain hose, you can force the water out of the washer by blowing air into the hose. You can use a manual air pump or a compressor for this task. Make sure to cover the opening of the hose with a cloth before blowing air into it to prevent any water from splashing out.
Step 5: Check the Drain Pump
If forcing the drain does not work, you may need to check the drain pump for any clogs or damage. The drain pump is located at the bottom of the washer and can be accessed by removing the front panel. Check if there is any debris or foreign objects blocking the pump.
Step 6: Clean the Drain Pump
If you find any debris or foreign objects in the drain pump, remove them carefully. Make sure to wear gloves and eye protection while doing this. Once you have cleaned the pump, reassemble the washer and test it to see if it is draining properly.
Related Questions
1. What are the common reasons for a Speed Queen washer not draining?
There can be several reasons why a Speed Queen washer is not draining. Some of the common reasons include a clogged drain hose or pump, a faulty drain pump, or a malfunctioning control board.
2. Can I force drain my Speed Queen washer without removing the drain hose?
No, it is not recommended to force drain a Speed Queen washer without removing the drain hose. This can cause water to splash out and damage the surrounding area or cause injury to the person working on the washer.
3. How often should I clean the drain pump of my Speed Queen washer?
You should clean the drain pump of your Speed Queen washer at least once a year to prevent any clogs or debris from accumulating and causing the washer to not drain properly.